Multiple models decentralized coordinated control of doubly fed induction generator

In this paper, a multiple model optimal tracking control (MOTC) design method for the double fed induction generator (DFIG) using correlative measured technique is proposed. The DFIG is represented by a third-order model, where electro-magnetic transients of stator are neglected. By using the correlative measured technique, the correlative measured matrix (CMM) of wind power system is obtained firstly. Then, a nonstandard state space equation of DFIG is obtained with the correlative measured vectors (CMVs), which reflect interactions between the DFIGs and grid. In order to cope with nonlinearities and continuous variation in the operating points, a multiple model design method is proposed in the discrete domain. The obtained control law, synthesized by using Bayesian probability, only depends on the local measured parameters. Hence, the MOTC can be regarded as a decentralized coordinated control, which can simplify the control structure and improve the transient stability of DFIG. To illustrate the effectiveness of the proposed MOTC strategy, simulations on a hybrid wind thermal power (HWTP) system are performed. The results show that the proposed MOTC strategy can provide acceptable performance throughout the whole operating region. Comparing to the conventional PID control, transient stability, damping, and fault ride-through capability of DFIG with the proposed MOTC design method have been improved effectively.     

真空热处理炉布料矩阵优化仿真分析

为了获得更高的加热效率和更好的温度均匀性,采用有限元软件建立了真空热处理炉加热过程仿真模型,并耦合PID算法用于温度控制。通过与实测温度对比,验证了仿真模型的准确性。借助该模型,模拟研究了布料矩阵对两种典型形状零件在真空热处理炉内加热特性的影响。模拟装炉时基于零件几何形状特征,对圆棒形工件采用顺排、叉排和环形排列3种形式,对圆盘形工件采用横排式和竖排式。研究结果表明:尽管零件形状和数量相同,但是随着布料矩阵的变化,加热效率和温度均匀性都会改变。对于圆棒形工件,采用环形排列不仅可以提高内部工件的加热速率,而且相较于叉排式可以将最大温差减小36 ℃;对于圆盘形工件,由水平式改为竖直式布料可以将最大温差由248 ℃减小至171 ℃。     

Ice aluminum debonding with induction heating#

The strong ice bonding to solid surfaces makes deicing such surfaces a challenging task. In this study, a heat flux will be induced into the interlayer of the ice and in this case aluminum. With a high heat flux it is possible to obtain a small liquid layer between the ice and the aluminum. In metallic materials the heat flux can be induced with an electromagnetic field via induction heating. The thickness of the heated metal layer depends on the frequency applied for the induction heating. High frequencies result in very thin layers of metal heated and hence represent an energy efficient method for de-icing the metal surface. The reduction of the energy consumption for deicing is the main goal. One application is the ice removal in ice slurry generators in this study. Compared to ice removal (scraped surface ice slurry generators) induction heating deicing offers energy and maintenance saving potential.     

Validation of Models Predicting Nucleation Rates from Induction Times and Metastable Zone Widths

Three approaches for estimation of nucleation rates from induction time and metastable zone width (MSZW) were validated based on directly measured nucleation rates for paracetamol in ethanol. To quantitatively predict nucleation kinetics using Kubota's methods it is necessary to know the minimum detectable number concentration of nuclei. This was found by determination of light transmission of a series of diluted suspensions of newly nucleated crystals where the size had already been assessed by optical reflection measurement (ORM). The measured nucleation rates strongly depended on both temperature and supersaturation. The Nyvlt method predicted nucleation rates in this system reasonably well; however, it gave slightly low estimates for all temperatures. The methods of Kubota provided nucleation rates that were low by an order of magnitude.     

钢轨交流闪光焊接过程过梁爆破特征分析

以高速摄影技术作为主要研究手段，研究钢轨交流闪光焊接过程过梁爆破特征，并结合热成像系统采集焊接过程温度场，以此为数据基础定量分析了钢轨交流闪光焊接过梁爆破特征. 结果表明,钢轨交流脉动闪光焊接工艺模式下，加速闪光阶段具有几个阶段中最高的闪光频次46.93次/s，脉动闪光阶段具有最低的闪光频次11.07次/s；连续闪光阶段闪光烈度为0.009 2 mm/次，是几个阶段中最强的，脉动阶段的闪光烈度最弱，为0.003 8 mm/次；从闪光加热因子来看，脉动阶段最高，符合了该阶段积累热量的主要目的；加速闪光阶段最低，是由于该阶段为了制造保护气氛产生的气化过梁带走了较多的热量；从闪光均匀度看，闪光最不均匀的阶段是闪平阶段，最均匀的阶段是脉动阶段，这恰恰说明了两待焊端面的微观平行情况在闪平阶段最差、脉动阶段最佳.     

Effects of Newtonian heating and thermal radiation on micropolar ferrofluid flow past a stretching surface: Spectral quasi‐linearization method

This study article addressesthe flow and heat transfer characteristics of a magnetite Fe₃O₄ micropolar ferrofluid flow past a stretching sheet. For practical interest, thermal radiation, Newtonian heating, and a heat source or sink are considered in this investigation. A useful Tiwari‐Das nanofluid model is considered to analyze the microstructure and inertial characteristics of the water‐based nanofluids containing iron oxide. The dimensionless nonlinear ordinary differential equations are solved by employing suitable similarity variables. The resulting nonlinear system is solved by the spectral quasi‐linearization method. The effects of different nondimensional parameters on various profiles are shown graphically and explored in detail. It is found that the micropolar ferrofluid exhibits a higher energy distribution than that of a classical micropolar fluid. Compared to the classical micropolar liquid, local skin‐friction is more significant for the micropolar magnetite ferrofluid. In the presence of Newtonian heating, the thermal behavior of the micropolar nanofluid is remarkably better than that of the classical micropolar fluid.     

Actions of viscous dissipation and Ohmic heating on bidirectional flow of a magneto-Prandtl nanofluid with prescribed heat and mass fluxes

The present contribution determines the impacts of viscous dissipation and Ohmic heating with magnetic coating on Prandtl nanofluid flow driven by an unsteady bidirectionally moveable surface. Random motion of nanoparticles and thermophoretic diffusion are elaborated through a two-phase nanofluid model. The novelty of the investigation is fortified by prescribed heat flux and prescribed mass flux mechanisms. The appropriate combination of variables leads to a system of strong nonlinear ordinary differential equations. The formulated nonlinear system is then tackled by an efficient numerical scheme, namely, the Keller–Box method. Nanoliquid-temperature and mass-concentration distributions are conferred through various plots with the impacts of miscellaneous-arising parameters. The rates of heat and mass transferences are also discussed through tables. The thermal states of the nanomaterial and mass concentration are reduced for incremental amounts of the unsteady factor, ratio parameter, elastic parameter, and Prandtl fluid parameter. Moreover, escalating amounts of the Brownian parameter, Eckert number, magnetic factor, and thermophoresis parameter enhances the temperature of the nanoliquid. An error analysis is also presented to predict the efficiency of the method used for the computational work.     

半轴套管多工位挤压自动化生产线中冲连皮缺陷产生机理及参数优化

针对半轴套管多工位热挤压自动化生产线工艺调试过程中,正挤压工序冲连皮时,管端易出现连皮粘连缺陷的问题,探讨了有可能造成连皮粘连的原因。通过对工艺流程和现场情况进行综合分析,提出了圆柱形坯料周向温度加热不均是关键的影响因素。采用Deform有限元分析软件,模拟了不同加热温差条件下,反挤压和冲连皮时材料变形及材料剪断过程。通过对模拟结果的分析,揭示了连皮粘连机理,并可知,当坯料周向加热温差小于30℃时,连皮可顺利冲下。根据模拟得出的合理温差,进行现场试验,实际情况与模拟结果具有较高的一致性,生产出的产品锻件切口平齐、连皮撕裂带分布均匀,有效地解决了连皮粘连的问题。     

薄板坯连铸连轧过程控制技术的发展、应用及展望

薄板坯连铸连轧面临品种和规格拓展、产品质量提升、生产成本降低及智能化生产等方面的改进以提升产线竞争力。从辊底式隧道加热炉智能燃烧系统、高精度轧制过程控制模型、兼顾全幅宽和多目标的板形综合控制技术3个方面，介绍了薄板坯连铸连轧过程控制关键共性技术的研发进展，并通过数据网关+双系统并行的在线替换模式，实现了新的过程控制技术零停机时间的工业应用。新技术应用后，加热炉实现了全自动烧钢，吨钢煤气消耗下降了19.4%，氧化烧损下降了3.8%，钢坯加热质量大幅度提升；在设备及其他系统不变的情况下，轧线产品质量及轧制稳定性显著提高，薄规格生产能力由2.0 mm扩展至1.2 mm，实现了双流异钢种交叉混合轧制和铁素体轧制，非计划过渡材显著减少，重点计划执行率由20%提高到95%以上，整体提升了薄板坯连铸连轧流程的效益和竞争力。最后，对薄板坯连铸连轧过程控制技术的发展方向进行了展望。     

火车轮模锻成形工艺及热处理换热系数测算

为研究火车轮在模锻成形过程中内部金属流动及淬火加热、踏面淬火中的换热系数和温度变化,利用有限元软件对其模锻成形及热处理过程进行数值模拟分析,并结合黄金分割优化法对综合换热系数进行了反传热计算。结果表明:模锻过程中,辐板与上模接触区域的等效应变最大,轮辋外侧变形相对较小,踏面附近区域变形较均匀;在淬火加热过程中,换热系数随工件表面温度升高而增加,当温度在500℃以下时,换热系数随温度的升高而快速增加,500℃以后,增速缓慢,800℃时,换热系数达0.15 kW·(m^2·℃)^-1;踏面淬火时,在700℃以下,随温度下降,换热系数迅速增大,300℃时达到峰值3.1 kW·(m2·℃)^-1,在250℃以下,换热系数稍有下降,100℃时换热系数为2.5 kW·(m2·℃)^-1。